FYREWASH® F1 was developed to give the maximum possible cleaning efficiency and effectiveness from a compressor cleaning chemical. FYREWASH® F1 can be used for both online & offline washing providing the operator with a high powered solution to compressor fouling. Approved & meets most major OEM’s world-wide.
FYREWASH® F1 can be used with any on-line/off-line injection system but for optimum cleaning results and economic usage of chemicals, Rochem offers a full range of patented manual or fully automatic atomising injection systems to suit any engine type.
Is normally performed by mixing one part FYREWASH® F1 concentrate with four (4) parts of water into a stable solution. Use demineralised water as specified by the engine manufacturer, typically <11μS/cm. The volume of chemical solution needed per wash and the optimum cleaning frequency will depend upon engine size, operating environment & fouling tendency. It is recommended that a post rinse is performed to ensure that the nozzle system is cleaned & ready for next operation.
Concentrated FYREWASH® F1 is normally mixed with four (4) parts of good quality water. The solution is injected at cranking speed, allowed to soak for 20 to 30 minutes then thoroughly rinsed off at cranking speed with good quality water acceptable to the engine manufacturer. FYREWASH® F1 can be used without dilution for offline cleaning, providing a superb cleaning result for heavily fouled compressors.
Add antifreeze below +10ºC, FYREWASH® F1 is compatible with Methanol, Propylene Glycol, Ethylene Glycol. Rochem manufacture a superior freeze point depressant, Rochem FPD, please contact Rochem for further information.