FYREWASH® F3 was developed to give the maximum possible cleaning efficiency
and effectiveness from a non-solvent chemical.
When developing and testing FYREWASH® F3, Rochem’s chemists evaluated all
other leading non-solvent water-based chemicals to make sure that F3 would
have superior cleaning qualities. This resulted in a non-hazardous, user-friendly
and highly biodegradable water-based cleaner which now sets the standard
against which the performance and cost effectiveness of all other true nonsolvent water-based gas turbine compressor cleaners can be judged.
Fyrewash F3 is also available in containers of 200 pcs of 38 x 16cm lint-free
wipes. Treated with Fyrewash F3 gas turbine compliant cleaning chemical these
wipes are ideal for hand cleaning of gas turbines blades and other gas turbine
parts. For Professional Use Only.
Approved & meets most major OEM’s world-wide. CEFAS Approved for use offshore.
FYREWASH® F3 can be used with any on-line/off-line injection system but for
optimum cleaning results and economic usage of chemicals, Rochem offers a full
range of patented manual or fully automatic atomising injection systems to suit any
Is normally performed by mixing one part FYREWASH® F3 concentrate with four (4)
parts of water into a stable solution. FYREWASH F3-Super Concentrate is to be mixed
in a 1:19 dilution. Use demineralised water as specified by the engine manufacturer,
typically <11µS/cm. The volume of chemical solution needed per wash and the
optimum cleaning frequency will depend upon engine size, operating environment
and fouling tendency. It is recommended that a post rinse is performed to ensure
that the nozzle system is cleaned and ready for next operation.
Concentrated FYREWASH® F3 is normally mixed with four (4) parts of good quality
water. FYREWASH F3-Super Concentrate is to be mixed in a 1:19 dilution. The
solution is injected at cranking speed, allowed to soak for20 to 30 minutes then
thoroughly rinsed off at cranking speed with good quality water acceptable to
the engine manufacturer. FYREWASH® F3 can be used without dilution for offline
cleaning, providing a superb cleaning result for heavily fouled compressors.
Add antifreeze below +10ºC, FYREWASH® F3 is compatible with Methanol,
Propylene Glycol, Ethylene Glycol. Rochem manufacture a superior freeze point
depressant, Rochem FPD, please contact Rochem for further information.